Wireless charging is one of the most convenient features on the Galaxy A36. You simply place your phone on a charging pad and it powers up without plugging in cables. But sometimes, the phone refuses to charge, or the charging is very slow.
If this happens, there are several common causes and practical fixes you can try.
Why Your Galaxy A36 Might Not Charge Wirelessly
- The charging pad is not aligned properly with the phone.
- The case on your phone is too thick or made of materials that block charging.
- The charger is incompatible or not delivering enough power.
- Software issues or outdated firmware.
- Wireless charging option turned off or disabled by mistake.
Check Charger Compatibility.
Not all wireless chargers work the same way. Some pads do not provide enough power, which can cause charging failures.
Make sure you are using a Samsung-certified charger or a Qi-compatible pad that supports at least 10W fast wireless charging. Using low-quality chargers can also make your phone heat up unnecessarily.
Adjust Phone and Pad Alignment.
Wireless charging relies on coils inside both the phone and the charger making proper contact. If they are off-center, charging may fail.
Place your Galaxy A36 flat on the pad and adjust the position slightly until the charging indicator appears on the screen. Avoid stacking the phone at an angle or placing it on uneven surfaces.
Remove Thick or Magnetic Cases.
Phone cases with metal parts, magnets, or extra thickness can block wireless charging.
Try removing your case before placing the device on the pad. If the phone charges fine without it, consider switching to a thinner or wireless charging–compatible case.
Restart the Phone.
Sometimes the charging feature may stop responding due to minor software glitches. Restarting the device often restores the function.
Press and hold the Side and Volume Down keys together until the power menu appears. Tap Restart, and then confirm. After the phone reboots, try wireless charging again.
Update the Software.
Outdated software can interfere with charging performance. Keeping your device updated ensures compatibility with different wireless chargers.
- Open Settings, and then tap Software update.
- Tap Download and install, and wait for the device to check for updates.
If an update is available, install it and then test wireless charging again.
Try Another Charger or Cable.
Sometimes the problem is not the wireless pad itself but the adapter or cable connected to it.
Swap the adapter and cable with Samsung’s official ones, or use another compatible fast charger. If wireless charging starts working, the original accessories may be faulty.
Reset Settings.
If all else fails, resetting settings can clear out system errors without deleting personal data. This restores features like Wi-Fi, Bluetooth, and wireless charging to default behavior.
- Open Settings, and then tap General management.
- Tap Reset, and then tap Reset all settings. Confirm and let the phone reboot.
If wireless charging was disabled by a misconfiguration, this step usually fixes it.
Wireless charging on the Galaxy A36 is generally reliable, and most problems come down to alignment, accessories, or minor software bugs. With the above solutions, you should be able to get it working again.
FAQs
Does wireless charging work with any case on the Galaxy A36?
No. Thick cases, metal-backed cases, or cases with magnets can block charging. It is best to use a case labeled as wireless charging compatible.
Why does my Galaxy A36 charge slowly on a wireless charger?
The charging speed depends on the wattage supported by both the phone and the charger. Using a lower-wattage pad or an unsupported adapter will result in slower charging.
Can I leave my Galaxy A36 on a wireless charger overnight?
Yes. The phone automatically regulates charging to prevent overcharging. However, using certified chargers is recommended to avoid overheating issues.
