The Always On Display feature on the OnePlus 13 is designed to show the time, battery status, and notifications even when the screen is off. It adds convenience while saving power since only specific pixels light up. However, if it suddenly stops working, a few simple adjustments can usually bring it back.
Why Your OnePlus 13 Always On Display Might Not Be Working
- The feature is turned off in settings.
- Battery Saver or Optimized Mode is restricting it.
- The display schedule is incorrectly configured.
- The latest software update has not been installed.
- Ambient Display gestures are interfering.
Enable Always On Display.
The most common reason for this issue is that Always On Display is disabled. Turning it on ensures that it activates when the screen is locked.
- Open Settings, and then tap Display and brightness.
- Tap Always-On Display, and then toggle the switch to enable it.
Select All day to keep it active whenever the phone is locked.
Check Display Schedule Settings.
If a custom schedule is set, AOD will only appear during specific hours. You may need to adjust this to ensure it shows up at all times.
- Open Settings, and then tap Display and brightness.
- Tap Always-On Display, and then choose Display mode.
Select All day or change the schedule to match your preference.
Disable Battery Saver.
Battery optimization features can pause Always On Display to extend battery life. Disabling Battery Saver can resolve the issue.
- Open Settings, and then tap Battery.
- Tap Battery Saver, and then turn it off.
If you use an optimization mode like Smart Battery Saver, disable it temporarily to see if the AOD returns.
Check Ambient Display Gestures.
On some OnePlus models, motion detection and gestures control when AOD appears. If these are off, the screen may remain blank.
- Open Settings, and then tap Special features.
- Tap Ambient Display, and then make sure gestures like “Pick up to show” or “Tap to show” are enabled.
This ensures the screen lights up briefly when you lift or tap the phone.
Update System Software.
Outdated firmware or bugs can interfere with display features. Installing the latest updates can fix hidden issues and improve performance.
- Open Settings, and then tap About device.
- Tap OxygenOS, and then select Check for updates.
If an update is available, download and install it, then restart your phone.
Reset All Settings.
If AOD still refuses to work, resetting all settings can help restore default configurations without deleting personal files.
- Open Settings, and then tap Additional settings.
- Tap Back up and reset, and then select Reset all settings.
After resetting, re-enable Always On Display and test it again.
Once your Always On Display is working again, you can enjoy quick access to time and notifications without waking the screen every time. It’s a simple feature that makes using your OnePlus 13 more seamless.
FAQs
Why does Always On Display turn off by itself?
This often happens when Battery Saver or Adaptive Battery is active. Disabling them ensures AOD stays visible.
Does Always On Display drain my battery quickly?
Not much. It uses very little power since only a few pixels light up on the AMOLED panel.
Can I customize my Always On Display?
Yes. In Display and brightness > Always-On Display, you can change clock styles, colors, and the type of information shown.
