If your vivo S50’s Always On Display is not showing up, the screen may stay completely black when locked. You expect to see the clock or notifications, but nothing appears. This issue is usually caused by simple settings, battery restrictions, or display limitations, and you can fix it in just a few minutes.
Why Your vivo S50 Always On Display Is Not Working
- Always On Display is turned off in settings.
- Battery Saver is limiting background display features.
- A schedule is set, so AOD only works during specific hours.
- Display brightness settings are too low.
- A temporary system glitch after a recent update in 2025.
1. Make Sure Always On Display Is Enabled
Always On Display must be manually activated. If it is disabled, the lock screen will remain completely blank.
Open Settings, and then tap Lock screen and wallpaper.
Tap Always On Display, and then toggle it on.
Lock your phone and check if the clock or display information appears.
2. Turn Off Battery Saver
Battery Saver reduces power consumption by limiting background visuals. When enabled, it can automatically disable Always On Display.
Open Settings, and then tap Battery.
Tap Battery Saver, and then switch it off.
Lock the device again to see if AOD returns.
3. Check AOD Schedule Settings
Your vivo S50 may be set to display AOD only at certain times. If the current time is outside that range, the feature will not activate.
Open Settings, and then tap Lock screen and wallpaper.
Tap Always On Display, and then check Schedule settings.
Disable the schedule or adjust the active hours.
4. Increase Display Brightness
If brightness is extremely low, Always On Display may appear invisible in certain lighting conditions. Adjusting brightness can make it visible again.
Open Settings, and then tap Display and brightness.
Increase the brightness level, and then disable adaptive brightness temporarily.
Lock the screen and test the feature.
5. Restart Your Phone
A temporary software glitch can interrupt the AOD service. Restarting refreshes system processes and often restores missing features.
Press and hold the Power button, and then tap Restart.
Wait for the phone to boot up, and then lock the screen.
Check whether Always On Display is now working.
6. Reset Lock Screen Settings
If settings conflict with each other, resetting them can restore proper behavior without deleting personal data.
Open Settings, and then tap System management.
Tap Reset, and then select Reset all settings.
Confirm the action and reenable Always On Display afterward.
Always On Display on the vivo S50 should work consistently once the correct settings are active and battery restrictions are removed. In most cases, the issue comes down to power saving or scheduling, and fixing those restores the feature instantly.
FAQs
Why does Always On Display turn off automatically on vivo S50?
Battery Saver or a scheduled time setting is usually responsible. When power saving activates, AOD may be disabled to conserve battery.
Does Always On Display drain a lot of battery on vivo phones?
It uses minimal power because only a small portion of the screen lights up. The impact on battery life is generally small.
Why is my Always On Display very dim?
The device automatically lowers brightness in dark environments. Increasing screen brightness or disabling adaptive brightness can help you test visibility.
