How to Fix vivo X300 Pro Ringtone Volume Too Low

If you keep missing calls because your vivo X300 Pro’s ringtone is too quiet, it can be annoying and easy to overlook. Many users face this issue even when the volume slider is maxed out. Fortunately, this is usually caused by a few simple settings or audio features that can be adjusted easily.

Let’s go over what might be causing the problem and how to fix it.

Why Your vivo X300 Pro Ringtone Volume Might Be Too Low

• Volume limit or “Do Not Disturb” mode is active.
• Smart or dynamic volume adjustment is enabled.
• Sound enhancement or audio balance settings are incorrect.
• Obstructed or dusty speaker grills.
• Outdated firmware or minor software glitch.

Increase Ringtone and Media Volume.

Before anything else, double-check the volume levels. Sometimes the ringtone volume is set lower than expected, especially after software updates.

1. Press either Volume key, and then tap the three dots that appear on the side of the screen.
2. Drag the Ringtone slider all the way to the right, and then adjust the Media slider as well.

Try calling your phone from another device to test if the sound is now louder.

Check for Do Not Disturb or Silent Mode.

Your phone might have automatically entered Do Not Disturb or Silent Mode, which can mute or reduce ringtone volume.

1. Swipe down from the top of the screen, and then look for the Do Not Disturb icon.
2. If it’s turned on, tap it once to disable it.

You can also go to Settings > Sound & vibration, and make sure Silent Mode is off.

Turn Off Smart Volume Adjustment.

Some vivo devices automatically adjust sound based on the environment or usage patterns. This can lower your ringtone volume unexpectedly.

1. Open Settings, and then tap Sound & vibration.
2. Tap Smart volume, and then toggle it off.

Once disabled, incoming call volume will stay consistent regardless of ambient noise.

Clean the Speaker Grills.

Dust, lint, or moisture can muffle the sound coming from your speakers. Cleaning them often helps restore full loudness.

Use a soft brush or dry cloth to gently clean the speaker grills at the bottom of your vivo X300 Pro. Avoid using sharp tools or liquids.

Reset Sound Settings.

If the volume is still too low, a settings reset can clear out any misconfigurations that might be affecting sound output.

1. Open Settings, and then tap System management.
2. Tap Backup and reset, and then select Reset all settings.

This will restore all sound settings to their defaults without deleting your data.

A quiet ringtone can easily make you miss calls, but once you adjust these settings, your vivo X300 Pro should ring loud and clear again. Keeping your phone updated and your speakers clean will help maintain consistent audio performance.

---

FAQs