If your vivo Y60 screen is flickering, flashing, blinking, or showing sudden brightness changes, start with the simple checks first. In many cases, the problem comes from brightness settings, refresh rate behavior, a buggy app, battery saving mode, display overlays, or a recent software update.
Screen flickering does not always mean the display is broken. It can also happen when auto brightness keeps adjusting too aggressively, when an app is not displaying properly, or when the phone is switching between display modes.
Start by restarting the phone, checking brightness settings, updating the software, and testing whether the flicker happens in Safe Mode. If the screen flickers even on the lock screen, recovery screen, or after a reset, the display may need service.
Quick answer
To fix screen flickering on vivo Y60, restart the phone, turn off auto brightness, lower the refresh rate, update the system software, and check whether the issue happens inside one app or across the whole phone.
Go to Settings > Display and brightness and adjust brightness manually first. vivo’s support page says auto brightness can be turned off from Display and Brightness, where you can also adjust the brightness slider manually.
If the flickering only happens at low brightness, check for display comfort, eye protection, or anti-flicker settings. vivo’s support pages also mention display options such as Eye Protection and Low Brightness Anti-flicker, although availability can depend on the model and screen type.
vivo Y60 screen flickering diagnostic table
| Symptom | Likely cause | What to try first |
|---|---|---|
| Screen flickers when brightness is low | Auto brightness, dimming behavior, eye comfort setting | Turn off auto brightness |
| Flicker appears while scrolling | Refresh rate or app rendering issue | Set refresh rate to standard |
| Flicker happens in one app only | App bug or display overlay | Update or reinstall the app |
| Screen flashes after an update | Software bug or app compatibility issue | Restart and update apps |
| Screen flickers while charging | Charger, cable, outlet, or power fluctuation | Try another charger and outlet |
| Flicker appears after a drop | Possible display or connector damage | Visit vivo service |
| Screen flickers with lines or green tint | Hardware display issue | Back up data and get support |
| Flicker stops in Safe Mode | Third-party app problem | Remove recently installed apps |
Why is my vivo Y60 screen flickering?
Your vivo Y60 screen may flicker because of a display setting, software bug, app conflict, power issue, or hardware damage.
Common causes include:
Auto brightness changing too often
High refresh rate behavior
Low brightness dimming
Eye protection or color adjustment settings
Buggy apps
Outdated software
Battery saver or performance mode
Third-party screen filter apps
Faulty charger or cable
Physical or liquid damage
Use the fixes below in order. Do not jump straight to a factory reset unless the basic steps fail.
1. Restart your vivo Y60
Start with a restart. It sounds basic, but it can clear temporary display glitches, stuck background processes, and app rendering problems.
- Press and hold the Power button.
- Tap Restart.
- Wait for the vivo Y60 to turn back on.
- Use the phone normally for a few minutes.
- Check whether the screen still flickers.
This will not delete your photos, apps, messages, or files.
If the flickering started after installing an app, update, theme, or launcher, restart the phone before changing deeper settings.
2. Turn off auto brightness
Auto brightness can sometimes make the screen look like it is flickering, especially indoors, near bright windows, or under artificial lighting.
- Open Settings.
- Tap Display and brightness.
- Turn off Auto brightness.
- Adjust the brightness slider manually.
- Keep the brightness around the middle level and check the screen again.
If the flicker stops, the issue may be caused by rapid brightness adjustment rather than a damaged display.
This is also useful if the screen flickers only when moving between bright and dark rooms.
3. Increase brightness if flickering happens at low brightness
Some phones show visible flicker or pulsing when the brightness is very low. This can be more noticeable at night or when using dark mode.
Try this:
- Open Settings.
- Tap Display and brightness.
- Raise the brightness above 30 percent.
- Turn off extra dimming or screen filter apps.
- Check whether the flickering stops.
If your vivo Y60 has Low Brightness Anti-flicker, Eye Protection, or a similar display comfort option, try turning it on or off and compare the result. vivo notes that some display options vary by device and screen type, so the exact setting may not appear on every vivo model.
4. Change the refresh rate
If the flickering happens while scrolling, gaming, watching videos, or switching apps, the refresh rate may be part of the problem.
- Open Settings.
- Tap Display and brightness.
- Look for Screen refresh rate or Refresh rate.
- Choose Standard, 60Hz, or the lower refresh option.
- Restart the phone and test it again.
This can help if the phone is switching between refresh modes or if one app does not behave well with a higher refresh rate.
Some retail listings describe the vivo Y60 as having a 120Hz LCD display, although official model details may vary by region. If your unit supports high refresh rate, testing a lower refresh rate is worth doing.
5. Turn off Eye Protection, Dark Mode, or color filters temporarily
Display comfort settings are useful, but they can sometimes make flickering, tint shifts, or brightness pulsing more noticeable.
Test these settings one by one:
- Open Settings.
- Tap Display and brightness.
- Turn off Eye Protection.
- Turn off Dark Mode temporarily.
- Check whether any color correction, color inversion, or accessibility display setting is enabled.
- Test the screen again.
Do not leave all comfort settings off permanently if you need them. This step is only to find out whether one setting is causing the flicker.
If the flickering stops after turning one setting off, leave that setting disabled or adjust its schedule.
6. Update your vivo Y60 software and apps
A software bug can cause screen flickering, especially after an app update, system update, or launcher change.
To update the phone:
- Open Settings.
- Tap System update.
- Download and install any available update.
- Restart the phone after updating.
To update apps:
- Open the Google Play Store.
- Tap your profile icon.
- Tap Manage apps and device.
- Tap Update all.
If the flickering started after a recent system update, use the phone normally for 24 to 48 hours after updating apps. Some background optimization can happen after major updates.
If the problem continues after that, move to the next fix.
7. Check if one app is causing the flicker
If the screen only flickers in one app, the display is probably not the main problem. The app may be using a buggy animation, video player, overlay, or screen effect.
Check this first:
- Open the app where the flickering happens.
- Update the app from the Play Store.
- Clear the app cache.
- Restart the phone.
- Test the app again.
To clear the app cache:
- Open Settings.
- Tap Apps.
- Select the problem app.
- Tap Storage.
- Tap Clear cache.
If that does not help, uninstall the app for a day and check whether the vivo Y60 display flickering stops.
Pay extra attention to apps that control brightness, blue light filters, screen dimming, floating buttons, gaming overlays, launchers, VPN bubbles, or screen recording.
8. Boot into Safe Mode
Safe Mode helps you check whether a third-party app is causing the vivo Y60 screen to flicker.
- Press and hold the Power button.
- Touch and hold Power off until the Safe Mode option appears.
- Tap Safe Mode.
- Use the phone for a few minutes.
- Check whether the screen still flickers.
If the flickering stops in Safe Mode, a downloaded app is likely causing the issue.
Remove recently installed apps first, especially:
Screen dimmer apps
Battery saver apps
Launchers
Theme apps
Screen recording apps
Gaming booster apps
Blue light filter apps
Apps with floating overlays
Restart the phone to exit Safe Mode.
9. Try another charger and cable
If your vivo Y60 screen flickers while charging, the issue may be connected to power delivery rather than the display itself.
Try this:
- Unplug the charger.
- Use the original vivo charger and cable if available.
- Try a different wall outlet.
- Remove extension cords or cheap charging adapters.
- Check whether the screen flickers only while plugged in.
If the flickering happens only while charging, stop using the suspicious charger or cable. A poor charger can cause unstable touch response, screen flashing, or heat.
If the phone also gets hot, charges slowly, or shows moisture warnings, unplug it and let it cool before testing again.
10. Reset settings or get the display checked
If none of the fixes work, reset the phone settings before doing a full factory reset.
Resetting settings can restore display, network, and system behavior without deleting personal files.
- Open Settings.
- Tap System management.
- Tap Backup and reset.
- Choose Reset all settings if available.
- Restart the phone.
Menu names may vary depending on the Funtouch OS version.
If the screen still flickers after resetting settings, back up your files and consider a factory reset. Only do this after saving your photos, messages, contacts, and important app data.
Get the vivo Y60 checked by a service center if:
The screen flickers on the vivo logo screen
The screen flickers in recovery mode
There are green, white, or pink lines
The phone was dropped
The phone got wet
The display flickers even after a reset
The screen turns black randomly
Touch response is also failing
At that point, the problem may be a damaged display panel, loose connector, or internal hardware fault.
What if the vivo Y60 screen flickers after an update?
If the flickering started after a software update, restart the phone first. Then update your apps from the Play Store.
After a major update, some apps may need updates to work properly with the new system version. Give the phone 24 to 48 hours of normal use, especially if the update was installed recently.
If the flickering gets worse, happens on the lock screen, or appears with colored lines, back up your data and contact vivo support.
What if the screen flickers only at night?
If the vivo Y60 screen flickers only at night, check low brightness, Eye Protection, Dark Mode, and any screen dimmer app.
Raise the brightness slightly and turn off extra dimming features. If the problem stops, the flicker may be related to low-brightness display behavior rather than hardware damage.
What if the screen flickers only in games?
If the vivo Y60 screen flickers only in games, lower the graphics settings, turn off game overlays, and test the standard refresh rate.
Also close background apps before playing. If only one game flickers, update or reinstall that game.
FAQs
Why is my vivo Y60 screen flickering?
Your vivo Y60 screen may be flickering because of auto brightness, low brightness, refresh rate settings, a buggy app, outdated software, a bad charger, or hardware damage.
Can screen flickering be fixed without repair?
Yes, if the cause is software or settings related. Restarting the phone, turning off auto brightness, changing refresh rate, updating apps, and using Safe Mode can fix many flickering issues.
Does screen flickering mean my vivo Y60 display is broken?
Not always. If the flicker happens only in one app or only at low brightness, it may be a settings or app issue. If it happens everywhere, even after a reset, the display may need service.
